How the business runs

A small area, learned properly

We work across the South Bay from Lawndale outward. That is a deliberately small patch, and it is small for a reason: within ten miles the failure mode changes completely, from salt-air corrosion at the beach to ultraviolet inland, and knowing where that line falls for your address is most of the job.

Every survey covers the attic as well as the roof, because on a low-pitch post-war roof the entry point and the stain are rarely in the same place. Every job is photographed slope by slope. Every price is against a written scope.

No doorstep quotes, and no price without a survey
We quote the flashing job first when that is what it is
Standard galvanized fixings are not specified near the water
If a scope cannot be photographed, it is not invoiced

A roof window and timber rafters in a sloped attic ceiling — **During the job**Survey before any price is given

How it runs

Four steps, no surprises

Free inspection with the fixings and flashings checked, then a written quote.

Call or message

Tell us the street and what you are seeing. In an area this compact the street alone tells us roughly how far from the water you are, which is half the diagnosis before anyone travels.

Free inspection, roof and attic

Both, together. On a low-pitch roof the water enters at a junction and travels before it drops, so a survey from the roof alone is how the same leak gets fixed twice.

The metalwork judged separately from the covering

Near the water these fail on completely different clocks. Knowing which one has actually finished is the difference between a flashing job and a re-roof, and it is a large difference.

Written scope, written quote, then the work

The failed detail named, and the metal specified for your distance from the sea. The area left clean and the before-and-after set handed over.

Before you choose

Five things worth checking on every quote you get

Including ours. There are enough door-knockers working this coast that the checks are worth making on anybody.

Is the C-39 number on the paperwork

Roofing is licensed work in California and the classification is C-39. The register is public. If the number is not offered before the ladder goes up, that is itself the answer to the question.

Has anyone judged the metalwork separately

It is the question that decides whether you need a roof or a set of flashings. A quote that treats them as one thing has not diagnosed anything, it has priced everything.

What metal is specified, and for what distance from the sea

Standard galvanized near the beach corrodes and the covering lifts around it. Stainless or heavy hot-dipped costs a little more and lasts several times longer -- and it is invisible afterwards, so it has to be written down.

Is the cool-roof claim actually true here

Lawndale is climate zone 6. The steep-slope requirement applies in zones 10 to 15, so a reflective covering is not a code obligation on your pitched roof. A low-slope section is a different matter.

Where was the figure worked out

If it was worked out at the curb, it is a guess. Salt air does its damage at the fixings and the flashings, none of which shows from the sidewalk, so a quote written without going up was written without the information that decides the job.

About